Toshiba 5205-S119 User Manual Download Page 117

Page: 117 / 312

117

Learning the Basics

Using Hibernation

5.375 x 8.375 ver 2.4.0

Do one of the following:

❖

Click

DC only

if you want the settings to apply only

when you are using battery power.

❖

Click

All

for the settings to apply whether you are

using battery power or outlet power.

Click

to close the Full Power Properties window.

Click

to close the TOSHIBA Power Saver Properties

window, then close the Control Panel.

Starting again after Turn Off or Shut down

To start the computer up again, press and release the power
button; the on/off light changes to green.

Using Hibernation

When Hibernation is enabled, you can put the computer into
Hibernation in more than one way.

Enabling the Hibernation command

Hibernation enabled is a default setting. If it should become
disabled, you can enable it as follows:

Click

Start

Control Panel

The Control Panel window appears.

Click

Performance and Maintenance

Double-click the

Toshiba Power Saver

icon.

The TOSHIBA Power Saver Properties window appears.

Summary of Contents for 5205-S119

























































































































































































































































































































Search results

Summary of Contents for 5205-S119

Reviews:

Related manuals for 5205-S119

Brands by name

Popular brands

Toshiba 5205-S119, User Manual

Search results

Summary of Contents for 5205-S119

Reviews:

Related manuals for 5205-S119

Brands by name

Popular brands