Toshiba 5105-S607 User Manual Download Page 110

Page: 110 / 302

110

Learning the Basics

Using Hibernation

5.375 x 8.375 ver 2.4.0

Sample Turn off computer dialog box with Hibernate option

The computer saves the state of the system, including all
open programs and files, to the hard disk, and then powers
down completely.

Going into Hibernation mode more quickly

You can also put the computer into Hibernation mode by
pressing the power button or closing the display panel.

To use either of these methods, you first need to turn it on in
Toshiba’s Power Saver utility.

Click

Start

, then click

Control Panel

The Control Panel appears.

Click

Performance and Maintenance

Double-click the

Toshiba Power Saver

icon.

In the Running on batteries area, click the

Details

button,

then select the

System Power Mode

tab.

Select

Hibernation

for the options you want.

❖

When I press the power button

Set this option to Hibernation for the computer to go
into Hibernation mode when you press the power
button.

Summary of Contents for 5105-S607















































































































































































































































































































Search results

Summary of Contents for 5105-S607

Reviews:

Related manuals for 5105-S607

Brands by name

Popular brands

Toshiba 5105-S607, User Manual

Search results

Summary of Contents for 5105-S607

Reviews:

Related manuals for 5105-S607

Brands by name

Popular brands