Toshiba 46UX600U Page 81 Owner'S Manual Download

Page: 81 / 107

Chapter 8: Advanced features

To display file status information:

Press

. The information will be displayed on the

bottom of the screen.

Press

again to remove the information from the

screen.

Note:

The file status information will disappear

automatically.

Note:

The information may not be correctly displayed

depending on contents, DMC or DMS.

File Compatibility:

USB or SD card use

Data compatibility: JPEG Exif ver 2.2
File format: JPEG
Maximum viewable resolution:

4096

4096 (HW decode) pixels

16384

16384 (SW decode) pixels

Maximum photo size: 9 MB
Maximum number of files: 2000 / folder

Content on DLNA CERTIFIED

™

Server

Data compatibility: JPEG EXIF Ver.1.x or later,

JFIF 1.02a

File format: JPEG
Maximum viewable resolution:

4096 × 4096 pixels (DMP)
1024 × 768 pixels (DMR)

Maximum photo size: 6 MB
Maximum number of files: 2000 / folder

Using the Photo Frame feature

This feature allows you to display a photo file stored on
the TV.
•Only one photo file can be stored on the TV.
•The photo file can be overwritten with a file from an

external device (USB, SD Memory Card).

•This Photo file cannot be imported from a DLNA

CERTIFIED

™

Server.

From the

PREFERENCES

menu, highlight

Photo

Frame Setup

and press

. The preview screen will

appear.

Press

to select

Start

, and then press

to start

Photo Frame.

To open from the Quick menu

Press

to open the Quick menu.

Press

to select

Photo Frame

, and then press

to start

Photo Frame

To close the Photo Frame:

Press .

Photo Select

From the

PREFERENCES

menu, highlight

Photo

Frame Setup

and press

. The preview screen will

appear.

Press

to highlight

Photo Select

, and press

. The device selection screen appears.

Note:

This screen will not appear when there is only

one device connected.

Press

to select the appropriate device, and

then press

Press

to select the photo you want to

copy from the USB storage device or SD card to the
TV, and then press

Photo Edit

From the

PREFERENCES

menu, highlight

Photo

Frame Setup

and press

. The preview screen will

appear.

Press

to highlight

Photo Edit

, and press

Press

to select

Rotate

Delete

Set the following items as required.

•

Rotate - Press

to rotate the image 90°clockwise.

•

Delete - Press

to select

YES

, and then press

Press .

INFO

QU CK

EXIT

Summary of Contents for 46UX600U












































































































Search results

Summary of Contents for 46UX600U

Reviews:

Related manuals for 46UX600U

Brands by name

Popular brands

Toshiba 46UX600U, Owner'S Manual

Search results

Summary of Contents for 46UX600U

Reviews:

Related manuals for 46UX600U

Brands by name

Popular brands