English
- 26 -
Wired Network Connection
•
You must have a modem/router connected to
an active broadband connection.
•
Connect your TV to your modem/router via an
ethernet cable. There is a LAN port at the rear
(back) of your TV.
Broadband ISP connection
LAN (ethernet) cable
LAN input on the rear
side of the TV
To configure wired settings please refer to
the Network/Internet Settings section in the
System>Settings Menu.
•
You might be able to connect your TV to your
LAN depending on your network’s configuration.
In such a case, use an ethernet cable to connect
your TV directly to the network wall outlet.
LAN input on the rear
side of the TV
network
wall socket
Configuring Wired Device Settings
Network Type
The
Network Type
can be selected as
Wired
Device
or
Disabled
, in accordance with the active
connection to the TV set. Select this as
Wired
Device
if you are connecting via an ethernet.
Internet Speed Test
Highlight
Internet Speed Test
and press the
OK
button. TV will check the internet connection
bandwidth and display the result when complete.
Advanced Settings
Highlight
Advanced Settings
and press the
OK
button. On the next screen you can change the IP
and DNS settings of the TV. Highlight the desired
one and press Left or Right button to change the
setting from
Automatic
to
Manual
. Now you
can enter the
Manual IP
and / or
Manual DNS
values. Select the related item in the drop down
menu and enter the new values using the numeric
buttons of the remote. Press the
OK
button to
save settings when complete.
Other Information
The status of the connection will be displayed as
Connected
or
Not
Connected
and
the current IP
address, if a connection is established.
Troubleshooting
Internet Connection Not Available
If the MAC address (a unique identifier number)
of your PC or modem has been permanently
registered, it is possible that your TV might
not connect to the internet. In such a case, the
MAC address is authenticated each time when
you connect to the internet. This is a precaution
against unauthorized access. Since your TV
has its own MAC address, your internet service
provider cannot validate the MAC address of your
TV. For this reason, your TV cannot connect to the
internet. Contact your internet service provider
and request information on how to connect a
different device, such as your TV, to the internet.
It is also possible that the connection may not be
available due to a firewall problem. If you think
this causes your problem, contact your internet
service provider.
