English
- 14 -
Watching Recorded Programmes
Select the
Recordings
from the
Media Browse
r
menu. Select a recorded item from the list (if
previously recorded). Press the
OK
button to
view the
Play Options
. Select an option then
press
OK
button.
Press the
Stop
button to stop a playback and
return to the
Recordings
.
Slow Forward
If you press
Pause
button while watching
recorded programmes, the slow forward feature
will be available. You can use
Rapid advance
button to slow forward. Pressing
Rapid advance
button consecutively will change slow forwarding
speed.
Note:
Viewing main menu and menu items will not be
available during the playback.
Recording Configuration
Select the
Recording Settings
item in the
Media Browser>Settings
menu to configure the
recording settings.
Format Disk:
You can use the
Format Disk
feature for formatting the connected USB disk.
Your PIN is required to use the
Format Disk
feature.
Note:
Default PIN can be set to
0000
or
1234
. If you
have defined the PIN(is requested depending on the
country selection) during the
First Time Installation
use the PIN that you have defined.
IMPORTANT:
Formatting your USB drive will
erase ALL the data on it and it’s file system will
be converted to FAT32. In most cases operation
errors will be fixed after a format but you will lose
ALL your data.
If “
USB disk writing speed too slow to record
”
message is displayed on the screen while starting
a recording, try restarting the recording. If you still
get the same error, it is possible that your USB
disk does not meet the speed requirements. Try
connecting another USB disk.
Media Browser Menu
You can play photo, music, and movie files
stored on a USB disk by connecting it to your
TV. Connect a USB disk to one of the USB inputs
located on the side of the TV. Pressing the
Menu
button while in the
Media Browser
mode will
access the
Picture
,
Sound
and
Settings
menu
options. Pressing the
Menu
button again will
exit from this screen.
You can set your
Media
Browser
preferences by using the
Settings
Menu.
Loop/Shuffle Mode Operation
Start playback with the
Play
button and activate
All files in the list will be
continuously played in original
order
Start playback with the
OK
button and activate
The same file will be played
continuously (repeat)
Start playback with the
Play
button and activate
All files in the list will be
played once in random order
Start playback with the
Play
button and activate
,
All files in the list will be
continuously played in the
same random order.
CEC and CEC RC Passthrough
This function allows to control the CEC-enabled
devices, that are connected through HDMI ports
by using the remote control of the TV.
The
CEC
option in the
System>Settings>More
menu should be set as
Enabled
at first. Press
the
Source
button and select the HDMI input of
the connected CEC device from the
Sources
List
menu. When new CEC source device is
connected, it will be listed in source menu with its
own name instead of the connected HDMI ports
name(such as DVD Player, Recorder 1 etc.).
The TV remote is automatically able to perform
the main functions after the connected HDMI
source has been selected.
To terminate this operation and control the TV via
the remote again, press
Quick Menu
button on
the remote, highlight the
CEC RC Passthrough
and set as
Off
by pressing Left or Right button.
This feature can also be enabled or disabled
under the
System>Settings>More
menu.
The TV supports ARC (Audio Return Channel).
This feature is an audio link meant to replace
other cables between the TV and an audio system
(A/V receiver or speaker system).
When ARC is active, the TV does not mute its
other audio outputs automatically. You will need
to decrease TV volume to zero manually if you
wish to hear the ARC audio only (same as optical
or co-axial digital audio outputs). If you want to
change connected device’s volume level, you
should select that device from the source list.
In that case volume control keys are directed to
connected audio device.
Note:
ARC is supported only via the HDMI1 input.
