English
- 21 -
(**)
Limited Models Only
Advanced Settings
Equalizer
Selects the equalizer mode. Custom settings can be made only when in
User
mode.
Dynamic Bass(**)
Enables or disables the Dynamic Bass.
Bass Gain(**)
Controls the bass gain level. Use Left or Right button to set.
DTS DRC
Dynamic Range Control provides gain adjustment of the source to maintain suitable
audible range at both low and high playback levels. It will function only if the source
audio format is DTS. Enable or disable the
DTS DRC
by setting as
On
or
Off
.
Sound Mode
You can select a sound mode (if the viewed channel supports).
Digital Out
Sets digital out audio type.
Headphone
Sets headphone volume. This option will not be available if the
Sound Output
option
is set as
Lineout
.
Please ensure before using headphones that the headphone volume is set to a low
level, to prevent damage to your hearing.
Balance
Sets sound balance. This feature will be activated if
Sound Output
option is set as
TV
or
Headphone Only
. Balance item adjusts the balance level of the TV speakers and
headphones together.
Reset
Resets some of the sound settings to factory defaults.
Network Menu Content
Network Type
Disable the network connection or change the connection type.
Scan Wireless
Networks
Start a search for wireless networks. This option will be available if the
Network Type
is set as
Wireless Device
.
Disconnect
To disconnect from a wireless network and delete your saved wireless network profile (if
previously saved), highlight this option and press
OK
. This option will not be available
if you did not connect to a wireless network. Refer to
Connectivity
section for more
information.
Press WPS on your
wifi router
If your modem/router device has WPS, you can directly connect to it using this option.
Highlight this option and press
OK
. Go to your modem/router device and press the
WPS button on it to make the connection. This option will be available if the
Network
Type
is set as
Wireless Device
.
Internet Speed Test
Start a speed test to check your connection bandwidth. The result will be displayed on
the screen when finished.
Advanced Settings
Change the IP and DNS configurations of your TV.
Networked Standby
Mode
Enable or disable this feature by setting it as
On
or
Off
.
Note:
For detailed information on the options of this menu refer to the
Connectivity
section.
