Toshiba 42RV550A, Owner'S Manual

Page: 35 / 54

Toshiba 42/46XV550A
35
Connecting your TV
Selecting the PC/HDMI1 audio mode
You can select PC audio or HDMI1 audio when using this
function (
-
page 34).
1
Press
M
, and then press
Y
or
Z
to display the
SETUP
menu.
2
Press
V
or
U
to select
AV Connection
, and then press
Q
to display the AV Connection menu.
3
Press
V
or
U
to select
PC/HDMI1 Audio
, and then
press
Y
or
Z
to select PC or HDMI1 .
Setting the HDMI1 audio mode
You can select from three sound modes for an HDMI or DVI
device connected to the HDMI1 input terminals (
-
page 34):
Auto , Digital or Analogue .
Note:
This function is available only when the PC/HDMI1 Audio mode
is set to
HDMI1
.
1
From the AV Connection menu, press
V
or
U
to select
HDMI1 Audio .
2
Press
Y
or
Z
to select
Auto
,
Digital
or
Analogue
.
Selecting the HDMI setting
The HDMI Settings menu consists of the following 3 items:
Deep Colour , x.v.Colour and Lip Sync . Some early
HDMI equipment may not work properly with your HDMI
TV. If you experience trouble, unplug your HDMI cable first
and then try setting these three options to
Off . This should
allow your early HDMI source to operate properly with your
TV.
1
From the
AV Connection
menu, press
V
or
U
to select
HDMI Settings , and then press
Q
.
2
Press
V
or
U
to select each item, and then press
Y
or
Z
to select the desired setting.
Deep Colour mode
This function increases the available colours from the HDMI
source to increase the boundaries defined by the RGB or
YCbCr colour space.
x.v.Colour
This function expands the acceptable colour range (limits) of
HDMI signals, and allows sending of wider colour signals
from HDMI sources.
Lip Sync mode
This option activates an auto audio/video display timing
adjustment function that allows HDMI source devices to
accurately perform synchronization automatically.
All above HDMI settings require a proper HDMI source
device.
If HDMI source products do not support these functions, the
TV may not work properly by activating these functions.
Notes:
•
In non-HDMI signal mode, this function is not available.
• If your HDMI connection is capable of 1080p and/or your TV
is capable of refresh rates greater than 60Hz or supports
Deep Colour, you will need a Category2 cable. Conventional
HDMI/DVI cables may not work properly with this mode.
AV Connection
PC/HDMI1 Audio
HDMI Settings
HDMI1 Audio
Digital Output
Digital
Auto
PC
AV Connection
PC/HDMI1 Audio
HDMI Settings
HDMI1 Audio
Digital Output
Auto
Auto
HDMI1
HDMI Settings
x.v.Colour
Deep Colour
Lip Sync
On
On
On
Asia_4246XV550A.book Page 35 Tuesday, September 16, 2008 3:03 PM