background image

HL196 (E/F) Web 213:276

HIGH

-DEFINITION TELEVISION

42HL196

YC/M

  

VX1A00010400

Integrated High Definition 

 

LCD Television

© 2006 TOSHIBA CORPORATION
All Rights Reserved

Owner’s Record

The model number and serial number are on the back of 
your TV. Record these numbers in the spaces below. 
Refer to these numbers whenever you communicate 
with your Toshiba dealer about this TV.

Model number:                           

 

Serial number:

For an overview of steps for setting up your new TV, see page 6.

Note: To display a High Definition picture, the TV must be receiving a 
High Definition signal (such as an over-the-air High Definition TV 
broadcast, a High Definition digital cable program, or a High Definition 
digital satellite program). For details, please contact your TV antenna 
installer, cable provider, or satellite provider.

IMPORTANT NOTE

Before connecting, operating, or adjusting this product, carefully 
read the Important Safety, Installation, Care, and Service 
information in the separate 

Installation Guide

.

HL196_EN.book  Page 1  Friday, June 2, 2006  2:35 PM

Summary of Contents for 42HL196 - 42" LCD TV























































































Reviews: