Toshiba 40G300U, Owner'S Manual

Page: 11 / 78

11
Chapter 1: Introduction
8 VOLUME
WX
— These buttons adjust the
volume level.
9 INPUT — Repeatedly press to change the source
you are viewing (
ANT/CABLE, VIDEO 1, VIDEO
2, ColorStream HD, HDMI 1, HDMI 2, HDMI 3,
HDMI 4, PC
).
10 HDMI
®
IN — High-Definition Multimedia
Interface input receives digital audio and
uncompressed digital video from an HDMI
device or uncompressed digital video from a DVI
device. HDMI connection is necessary to receive
1080p signals.
11 VIDEO-2 IN — The side panel A/V connections
are referred to as “ VIDEO 2 ” and include standard
A/V connections.
12 USB port — To access photo or music files.
TV front and side panel controls and connections
Model 40G300U is used in this manual for illustration purposes.
1 2
3
7
8
9
11
12
4
5
6
10
1 Green LED and TOSHIBA Logo LED
Power LED(Green) = Power indicator
TOSHIBA Logo LED= On or Off (
page 30).
2 Remote sensor
— Point the remote control
toward this remote sensor ( “Remote control
effective range” on page 21).
3 POWER — Press to turn the TV on and off.
If the TV stops responding to the controls on
the remote control or TV control panel and you
cannot turn off the TV, please unplug the power
cord few seconds then re-plug to try again.
4 ARROWS
STWX
— When a menu is on-
screen, these buttons function as up/down/left/
right menu navigation buttons.
5 MENU (ENTER) — Press to access the menu
system ( pages 28–29). When a menu is on-
screen, the MENU button on the TV’s control
panel functions as the ENTER button.
6 EXIT — Press to instantly close an on-screen
menu.
7 CHANNEL
ST
— When no menu is on-screen,
these buttons change the channel (programmed
channels only;
page 31).
TV front
TV top
Left side panel
Control panel