53
Setting up your TV
Viewing the system status
Viewing the system status
1
Press the
MENU
button and open the
Setup
menu.
2
Highlight
Installation
, and then press the
ENTER
button.
A new set of Installation menu icons appears.
3
Open the
System Status
menu, highlight
System
Information
, and then press the
ENTER
button.
4
Press the ( / arrow) buttons to scroll through the menu bar
to select
Factory Defaults
or
Support Information
.
The related information appears.
To close the screen and return to the Installation menu:
❖
Highlight
Done
in the Support Information screen, and then
press the
ENTER
button.
To return to normal viewing, press the
EXIT
button.
Resetting Factory Defaults
To reset all settings and channels to their factory default values:
1
Press the
MENU
button and open the
Setup
menu.
2
Highlight
Installation
, and then press the
ENTER
button.
A new set of Installation menu icons appears.
3
Open the
System Status
menu, highlight
System
Information
, and then press the
ENTER
button.
4
Press the ( / arrow) buttons to scroll through the menu bar
to select
Factory Defaults
.
5
Highlight
Yes
, and then press the
ENTER
button.
6
If a PIN code has been set, enter your PIN code.
7
Press the ( / arrow) buttons to select
Done
, and then press
the
ENTER
button.
A warning message appears.
8
Select
Yes
, and then press the
ENTER
button.
The TV turns off automatically after a few seconds.
9
After the TV turns off, unplug the TV power cord and then
plug it in again to complete the reset process.
To cancel the reset process, select
No
, and press the
ENTER
button
in
above.
