Toshiba 37WL68P, Service Manual

Page: 122 / 191

Exit from Service Mode
Pressing POWER button to turn off the TV once.
Initialization of Memory Data of QA02 and setting data of signal board.
After replacing QA02 or signal board, the following initialization is required.
1) Enter the service mode.
2) Select menu of ID by pressing P
or P during display of adjustment menu in the
service mode.
3) Change ID data into MODEL ID to initialize by pressing
+ or -., refer to table
below.
4) Press and hold the CALL button on the remote control, then press the CHANNEL
button on the TV.
5) Initialization progress dialog including model name and panel vender is shown.
OPT5
D7
(bit7)
D6
(bit6)
D5
(bit5)
D4
(bit4)
D3
(bit3)
D2
(bit2)
D1
(bit1)
D0
(bit0)
AUO Panel PMVA - - 0 - - - - -
AMVA - - 1 - - - - -
100 Hz Drive Off - - - 0 - - - -
On - - - 1 - - - -
Panel
Resolution
WXGA - - - - 0 0 0 1
1080p - - - - 0 0 1 0
CAUTION: Never attempt to initialize the data unless QA02 has been
replaced.
Whenever using new signal board to the set, setting the Model ID data
according to Panel option data.
Page 7 of 18
2013-12-02 file://\\serwer\instr\CD\1000-1099\CD1031\37WL68P-01\37WL68P-01\html\!adj-sm...