34
Adjusting the clock phase of the picture
If the clock phase, which synchronize the PC
signal and LCD display, is not optimized, the
picture will blur.
This function enables you to adjust clock phase
and display a clear picture.
1
From the
PC Setting
menu, press
V
or
U
to
select
Clock phase
.
2
Press
Y
or
Z
to obtain a clear picture.
Clock phase
0
Adjusting the sampling clock
If the sampling clock does not match with the dot
clock frequency of the PC, blurred picture detail
will occur, or screen width will change, or drift
patterns in vertical lines may be apparent.
This function enables you to adjust it and
optimize the picture.
1
From the
PC Setting
menu, press
V
or
U
to
select
Sampling clock
.
2
Press
Y
or
Z
to optimize the picture.
Sampling clock
0
Resetting the PC setting
The Reset function adjusts the PC Setting to the
factory settings.
1
From the
PC Setting
menu, press
V
or
U
to
select
Reset
.
2
Press
Q
.
Note:
When a PC is connected using HDMI none of
these function will be available.
Connecting your TV
REGZA-LINK connection
You can control the basic functions of connected
audio/video devices using the TV’s remote
control if you connect a REGZA-LINK compatible
audio receiver or playback device. For an
explanation of setup and operations, see pages
26, 27.
Before controlling the device(s):
• After completing the above connections, set
the
REGZA-LINK
setup menu as you desire
(
-
page 27).
• The connected devices must also be set.
For details, see the owner’s manual for each
device.
324246RV600ETY_En.indd 34
324246RV600ETY_En.indd 34
7/28/2009 10:08:20 AM
7/28/2009 10:08:20 AM
