Toshiba 32L2453RB, Service Manual

Page: 16 / 52

(2 / 3)
Fixed Pos/Video Off/ On
Remote control power button on or TV power switch
(on side body) on, then display goes to fixed POS/Video
(= nealy equal #9)
*On: fixed pos/video set
*On (AC): TV tunes to preset “Pos/Video” (channel or input) only
when AC power is applied. When TV is powered on by power button, tune to the
last channel or input.
Off
ATV(0~99)/SCART/AV/
YPBPR/HDMI1/HDMI2/
PC/DTV *TV, Component, AV,…, PC,HDMI,….Off
TV:1~255[dec] (normal:0)
DTV: depends on channel auto tuning
0 (ATV)
Fixed Volume Off/ On
Remote control power button on or TV power switch(on side body) on , then
forced volume setting
Off
0~100[dec] (normal:50) *101~ : not available 50
Fixed Picture Mode Off/ On
Remote control power button on or TV power
switch(on side body) on, then picture mode is selected
*On: Fixed selectable Pic.
Off
0:Dynamic(Default)
1:Standard
2:Mild
3:Movie
4:Memory
Dynamic
Fixed Picture Size For Video Non/ Wide /4:3/ Native Non
Fixed Picture Size For PC Non/ Wide /Normal/ Dot by Dot/ Non
Welcome Message Off/ On Remote control power button on or TV power Off
1:Default
2:8 Sec. switch(on side body) on, then fixed "Welcome to our hotel" Message is displayed.
'Until first operation' means that first event for TV
Default
2
8 Sec.
3:15 Sec.
Until first operation means that first event for TV
occur (ex. Ch up).
efault
Update Welcome Message NO/YES
It will update the logo, when TV on the new logo show.
*Using USB, user replaces the user original message with the default welcome
message.
As below is message, the file limitation items:
1. File format should be JPG file.
2. JPG Resolution <= 1360 x 768.
3. JPG file size < 64KB.
4. JPG file name is “Hotel_Logo.jpg”.
NO
Teletext Off/ On
Teletext functions are depend on Teletext setting
*On: enable Teletext functions and operation
*Off: disable Teletext functions and operation
On
ATV/DTV P+/P- Off/ On
*On: enable ATV/DTV P+/P-
*Off: disable ATV/DTV P+/P
Off
TV Power Disabled/ On/ Standby
*Disabled: TV returns to previous Standby/On state when AC power is applied.
*On: Power TV on when AC power is applied.
*Standby: Put TV in Standby when AC power is applied.
Disabled
Reset Hotel Menu NO/YES Set to default all setting in Hotel mode menu NO