Toshiba 32L2400 Series, Owner'S Manual

Page: 17 / 32

Selecting the stereo programmes
When a stereo programme is received,
d
Stereo
appears and press
s
.
• Use the modes: Stereo and Mono
Selecting the monaural programmes
If sound distortion, interruptions or silence arises in
the low sound volume level, setting the
e
Mono 2
mode will mitigate the problem.
When a monaural programme is received,
e
Mono
appears and press
s
.
• Use the modes: Mono 1 and Mono 2
NOTE:
On some cases, the reception of stereo/bilingual
broadcasts may not be possible after switching on the
e
Mono 2 mode.
Adjusting the sound Balance
• Use the menu: SOUND and Balance
• Use the button:

and

Using the Sound Mode
Choose your preferred Sound Mode.
• Use the menu: SOUND , Advanced Sound
Settings
• Use the item: Sound Mode
• Use the modes: Dynamic , Natural and Clear
Voice
NOTE:
You can also press on the remote control to switch
Sound Mode .
Adjusting the sound quality
You can adjust the basic sound quality.
• Use the menu: SOUND and Advanced Sound
Settings
• Use the items: Bass and Treble
• Use the button:

and

Using the Surround
Surround help to create rich and wider sound from
stereo sound sources.
• Use the menu: SOUND , Advanced Sound
Settings and Surround
• Use the modes: On or Off .
Using the Power Bass Booster
Power Bass Booster helps to create rich bass.
• Use the menu: SOUND , Advanced Sound
Settings
• Use the item: Power Bass Booster
• Use the modes: Super , Normal and Off
NOTE:
This may not have an eff ect, depending on the audio
source.
Resetting the Advanced Sound Settings
• Use the menus: SOUND , Advanced Sound
Settings and Reset
• Use the item: Reset (select Yes and press OK )
Using the Dynamic Range Control
This feature allows control of compression for Dolby
Digital.
• Use the menu: SOUND
• Use the item: Dynamic Range Control
Using the Audio Distortion Control
Prevents audio distortion.
• Use the menu: SOUND
• Use the item: Audio Distortion Control
• Use the modes: On and Off
Using the Audio Level Off set
Sometimes there can be large changes in volume
when switching from an ATV channel or an external
input. Using this feature reduces these volume
diff erences.
• Use the menu: SOUND
• Use the item: Audio Level Off set
• Use the button:

and

Using the Spectrum Analyser
Shows sound in a visual format.
• Use the menus: SOUND
• Use the item: Spectrum Analyser
NOTE:
The Spectrum Analyser display turns off when any
other procedure is performed.
– 17 –