Toshiba 32L2400 Series, Owner'S Manual

Page: 13 / 32

Watching TV programmes
Selecting the menu language
You can select a language for the on-screen display.
• Use the menu: SETUP
• Use the item: Menu Language
Changing the position
1
Enter the desired position number using the
Number buttons on the remote control.
For positions below 10, use 0 and the required
number e.g., for position 1.
2
You can also change the position by using P
U
or P
u
.
The position will be displayed on the screen
with the Mono/Stereo/Dual audio status.
NOTE:
Changing positions between diff erent format channels
takes several seconds.
Switching between two positions
You can switch two positions without entering
actual position number each time.
1
Select the fi rst position you want to view.
2
Select the second position with the Number
buttons (0-9).
3
Press . The previous channel will be displayed.
Each time you press , the TV will switch back and
forth between the two positions.
Displaying the on-screen information
1
Press to display the following on-screen
information.
4
ABCD
Stereo
The information will disappear in several
seconds.
To erase the display instantly, press
again.
Sorting positions
Ex.: To swap channel ABCD (Prog.1) for channel
MNOP (Prog.4):
1
From the SETUP menu, press

or

to select
Manual Tuning menu, and then press OK .
2
Press

or

to select the channel ABCD , then
press

.
Manual Tuning
Pos.
0
1 ABCD
2 EFGH
3 IJKL
MNOP 4
5
6
7
Label
3
Press

to select the new position “ 4 ”, then
press

.
4
Press

to select the channel MNOP , then press

.
5
Press

to select the new position “ 1 ”, then
press

.
6
Confi rm new Manual Tuning menu.
Selecting the external input source to view
1
Press
o
on the remote control until the
external input mode list appears on the screen,
then press

,

or
o
to select appropriate
input source.
2
Press OK .
VIDEO (
o
standard video input) ,
HDMI (HDMI input)
NOTE:
If the Inputs list is displayed by pressing
p
/
o
and
U
or
u
on the left side of the TV and
U
or
u
, the options
are VIDEO/HDMI/TV.
Labeling external input sources
These input labels are shown in the input selector.
You can label external inputs according to the
devices you have connected to the TV.
1
From the PREFERENCES menu, press

or

to select Input Labelling and then press OK .
2
Press

or

to select the item you want to
label and press

or

to select --, Amplifi er ,
Cable , DVD , Game , PC , Recorder , Satellite or
VCR , or press the RED button to turn on the
skip.
– 13 –