89
Setting up your TV
Displaying TV status information
YUV, Chroma Format). When the
HDMI Information
is set to
Off
, the normal banner is displayed.
v
The signal information banner will appear when this feature is set
to
On
and you watch an HDMI
®
input and press the
INFO
button. The signal information will disappear after approximately
60 seconds.
v
If you press the
INFO
button when this feature is set to
Off
, only
the normal banner will appear.
Displaying TV status information
To display TV status information using the
RECALL
button:
v
Press the
RECALL
button on the remote control.
The following information will be displayed (if applicable):
v
Current input (
ANT/CABLE, Video
, etc.)
v
If ANT/CABLE is the current input, either “CABLE” (for cable
TV) or “ANT” (for over-the-air broadcasts).
v
Channel number (if in
ANT/CABLE
mode)
v
Digital signal strength indicator (bar graph in lower right
corner of box; for digital signals only)
v
Stereo, Mono, or SAP audio status (when in HDMI
®
input
mode, Dolby
®
Digital, or PCM)
v
Video resolution
v
Aspect ratio of incoming video signal (4:3 or 16:9)
v
V-Chip rating status
v
GameTimer (if set)
To close the Recall screen, press the
RECALL
button again.
To display TV status information using INFO, press the
INFO
button.
The following additional information will display for digital
channels, if applicable:
v
Title
v
Duration
