Toshiba 32AV500E - 32" PAL/NTSC Multi-System HD Ready LCD Television, Owner'S Manual

Page: 18 / 36

18
Using the TV’s features
Selecting the picture mode
You can select the picture quality instantly among
three preset modes and one user-set mode.
• Press
N
to select the desired picture quality.
Dynamic
Mode Picture quality
q
Dynamic
bright and dynamic picture
q
Standard
standard picture
q
Mild
soft picture
q
Memory
the picture quality you set
Note:
In the PC input mode (
-
page 23), this mode is
not available.
Adjusting the basic picture quality
1
Press
M
, then press
I
or
i
to display the
PICTURE menu.
PICTURE
MENU Back Watch TV EXIT
OK Picture settings
Off
Base color adjustment
3D Color management
Active Backlight Control On
Cinema mode On
2
Press
u
or
U
to select the Picture settings
menu, then press
Q
.
Tint
Color
Back light
MENU
Back Watch TV
EXIT
100
50
0
0 Shar pness
Contrast 100
Picture settings 1/2
Brightness
50
3
Press
u
or
U
to select an item you want to
adjust, then press
I
or
i
to adjust the settings
as required.
Contrast 100
Selection
I
Pressing
i
Back light darker brighter
Contrast lower higher
Brightness darker brighter
Color paler deeper
Tint reddish greenish
Sharpness softer sharper
Notes:
• The Tint may only be adjusted on NTSC signal.
• In the PC input mode (
-
page 30), Color , Tint
and Sharpness modes are not available.
Activating the black/white level
This function increases the strength of dark
areas of the picture which improves defi nition.
1
From the Picture settings menu, press
u
or
U
to select Black/White Level on the 2nd
page.
Color Temperature
Black/White Level
MENU Back Watch TV EXIT
On
Cool
MPEG NR
Low
Picture settings 2/2
DNR Auto
2
Press
I
or
i
to select On or Off .
Black/White Level
On
Note:
In the PC input mode (
-
page 30), this mode is
not available.
Activating the MPEG NR (Noise Reduction)
If the receiving signal of MPEG is a mosquito
(grained) noise depending on the compression
and conversion, the noise may be reduced when
using this function.
1
From the Picture settings menu, press
u
or
U
to select MPEG NR on the 2nd page.
2
Press
I
or
i
to select Off , Low , Middle or
High .
MPEG NR Low
Note:
In the PC input mode (
-
page 30), this mode is
not available.
323742AV500ETY_EN.indd 18 323742AV500ETY_EN.indd 18 2/22/2008 3:06:41 PM 2/22/2008 3:06:41 PM