Toshiba 28N53, Manual

Page: 17 / 20

ENGLISH - 17 -
• Press button again to allow the next page
to be displayed.
• Press button to display the selected
Teletext page.
Fastext
• Press button to move the Teletext screen
forward one page at a time.
• Press button to move the Teletext screen
backward one page at a time.
For Fastext
The subject-heading for the information may
have a particular colour.
• Press an appropriate
RED , GREEN , YELLOW
or BLUE button in order to reach the relevant
page quickly.
For TOP text
TOP text mode of operation will be activated
automatically according to the transmission.
• If TOP text transmission is present, colour
coded buttons will appear in status row.
• If TOP text transmission is not present, the
status row will not appear.
The subject-heading for information may be
located in a coloured box.
In TOP mode, the
or commands will
request the next or previous page respectively.
To exit Teletext
• Press button twice or press EXIT
button while Teletext mode is active. The
screen will switch to TV mode.
To Display the Time
• While watching a TV programme with Teletext
transmission press button. The current
time information, captured from Teletext will be
displayed in the upper middle of the screen.
Press again to remove.
• If the programme being watched does not
have Teletext transmission, no information will
be displayed.
Connect Peripheral Equipment
There is a wide range of audio and video equip-
ment that can be connected to your TV.
The following connection diagrams show you
where the different equipment should be con-
nected at the back or the right side of the TV.
Via the SCART
Your TV set has two Scart sockets. If you want to
connect peripherals (e.g. video, decoder, etc.)
which have Scarts, to your TV , use EXT. inputs.
If an external device is connected via Scart
socket , TV is switched to AV mode automatical-
ly. If the signal is RGB then the RGB OSD indica-
tor is displayed on the screen.
RGB mode
If your equipment can output RGB signals,
connect it to the AV-1 (EXT.1) terminal.
• Select the RGB mode to watch images from
that equipment.
Via Ant Input
If you want to connect to your TV, peripherals like
video recorders or decoders, but the device you
want to connect does not have Scart, you
should connect it to the ANT input of your TV set.
If the VCR is connected via antenna input, we
suggest you use Programme 0.
Decoder
Cable TV offers you a wide choice of pro-
grams. Most of them are free, others are to be
paid for by the viewer. This means that you will
need to subscribe to the broadcasting
organisation whose programmes you wish to
receive. This organisation will supply you a
corresponding decoder unit to allow the
programmes to be unscrambled.
For further information ask your dealer. See
also the booklet supplied with your decoder.
Connect a decoder with an aerial socket to
the TV
• Connect the aerial cable.
A01-28N53G&ENG-28420-1710UK-AK37-ST7P-PLLCH-50077016.p65 21.02.2006, 11:57 17