background image

34

Appendix

27/32/36AF41(E)

Viewing the demonstration (DEMO) mode

The demonstration (DEMO) mode is an option available on the
SET UP menu that will demonstrate several features of your TV.

To start the demonstration mode:

1. Press 

MENU

.

2. Press 

x

 or 

 to highlight the SET UP menu.

3. Press 

y

 or 

z

 to highlight DEMO.

4. Press 

x

 or 

 to highlight START.

4. Press 

MENU

 to start the demo.

To stop the demonstration mode:

Press  

RECALL

EXIT

, or 

POWER

.

Understanding the last mode memory feature

If the power is cut off while you are viewing the TV, the Last Mode
Memory feature turns the TV on automatically when the power is
resupplied.
If the power is going to be off for a long time and you are going to be
away from your TV, unplug the power cord to prevent the TV from
turning on in your absence.

Using the sub-bass system (SBS)

The sub-base system (SBS) allows you to enhance bass performance,
even when the volume is low.

To turn the sub-bass system on (or off ):

1. Press 

MENU

.

2. Press 

x

 or 

 to highlight the AUDIO menu.

3. Press 

y

 or 

z

 to highlight SBS.

4. Press 

x

 or 

 to highlight ON (or OFF).

MOVE

[       ]

[       ]

AUDIO

SELECT

   MORE
SPEAKERS:

[ON] OFF

SBS:

[ON] OFF

SBS LEVEL:

50

To adjust the SBS level:

1. Turn the sub-bass system on, as instructed above.
2. Press 

MENU

.

3. Press 

x

 or 

 to highlight the AUDIO menu.

4. Press 

y

 or 

z

 to highlight SBS LEVEL.

5. Press 

x

 or 

 to adjust the SBS level.

MOVE

[       ]

[       ]

AUDIO

ADJUST

   MORE
SPEAKERS:

[ON] OFF

SBS:

[ON] OFF

SBS LEVEL: 50

– 

 

            

TV
CABLE
VCR

MENU/

ENTER

CH RTN

RECALL

MUTE

CH

CH

VOL

VOL

1

4

7

2

5

8

3

6

9

0

ENT

100

POWER

o

EXIT

MENU

yz

 

x

 

RECALL

EXIT

POWER

MOVE              SELECT [       ]

[       ]

SET UP

   MORE

DEMO

[START] STOP

IMAGE TILT

Note:

On models 32AF41 and 36AF41,
press the DEMO button on the front
panel to view the demonstration
mode.

Demo

DEMO

MENU

TV/VIDEO

VOLUME

CHANNEL

POWER

TV Front Panel (32AF41 and 36AF41)

Summary of Contents for 27AF41







































Reviews: