Using List mode
1
Press
to access teletext.
Red
Green
Yellow
Blue
100
TEXT M00
14:58:55
100
200
300
400
The four choices at the bottom of the screen are
now number —
100
,
200
,
300
and
400
, which
have been programmed into the TV’s memory.
2
To view these pages, use the coloured prompt
buttons.
e.g. press the
Green
button to view page 200.
3
If you want to change these stored pages, press
the coloured button for the colour you want to
change.
e.g. Press the
Green
button and enter the
3-digit number.
This number will change and blinking.
4
Press
Q
to store your choice. The bars at the
bottom of the screen will fl ash white.
5
You may view other pages by simply entering
the 3-digit page number — but NEVER press
Q
or you will lose the favorite already stored.
Teletext buttons on the remote control
Below is an introduction to the teletext buttons on
your remote control and their functions.
To display a page of teletext:
Press
to display teletext. Press again to
superimpose the teletext over a normal broadcast
picture. Press again to return to normal TV mode.
To display an index/initial page:
In
Auto-mode
Press
to access the index page. The one
displayed is dependant on the broadcaster.
In List-mode
Press
to return to the 100 page or initial
page.
To reveal concealed text:
Some pages cover topics such as quizzes and jokes.
To discover the solutions, press
.
To hold a wanted page:
This function is included as it is part of the broadcast
teletext system but you will not need it as this TV
allows you to control the display of sub-pages.
To enlarge the teletext display size:
Press
once to enlarge the top half of the page,
press again to enlarge the bottom half of the page.
Press again to revert to the normal size.
To select a page while viewing a normal picture:
When in teletext mode, if a page selection is made
and then
is pressed, a normal picture will be
displayed. The TV will indicate when the page is
present by displaying the title bar of the text page at
the top of the screen. Press
to view the page.
Note:
It will not be possible to change programme position
while in Teletext mode, you will have to cancel the
teletext fi rst by pressing
to return to a normal TV
picture.
To select the time display:
If you press
while watching a normal TV
broadcast, you will see a time display from the
broadcaster. It will remain on the screen for about 5
seconds.
21:56:25
9:56 and 25 seconds p.m.
Using the PC Settings
•
First connect the PC and press
until the
video input mode list appears on the screen, then
press
or
and
Q
in order to select the PC
input mode (
-
page 13).
•
This function may not be available for some signal
or if no signal is received.
•
The optimum points of the
Clock Phase
and
Sampling Clock
adjustments may be
incomprehensible according to the input signals.
Adjusting the picture position
•
Use the menus:
SETUP
and
PC Settings
•
Use the items:
Horizontal Position
and
Vertical
Position
Adjusting the Clock Phase of the picture
If the Clock Phase, which synchronize the PC signal
and LCD display, is not optimized, the picture will
blur.
This function enables you to adjust
Clock Phase
and display a clear picture.
•
Use the menus:
SETUP
and
PC Settings
•
Use the item:
Clock Phase
– 18 –
233240PU200Series̲EN̲0620.indd 18
233240PU200Series̲EN̲0620.indd 18
2012/06/26 8:04:43
2012/06/26 8:04:43
Summary of Contents for 23PU200 series
Page 32: ......
