Toshiba 22SL700A, Owner'S Manual

Page: 34 / 48

34
Using the TV’s features (General)
4. Use ▲ or ▼ to highlight the input that you want to
disable and press to lock.
Input Block
Select Back Exit
EXIT
Set
OK RETURN
1
2
3
4
5
6
7
8
9
TV
1
2
3C
4C
HDMI 1
HDMI 2
HDMI 3
PC
Change Password
Change the 4-digit parental control password. The
default password is “ 0000 ”.
1. Highlight
Parental
in the
SETUP
menu, and press
► or to enter.
2. Enter the 4-digit password.
3. Press ▲ or ▼ to highlight the
Change Password
and press ► or to enter.
Parental
Channel Block
Programme Block
Input Block
Change Password
Panel Lock Off
Factory Default
Select Back Exit
EXIT
Enter
OK RETURN
4. Enter the 4-digit new password, and re-enter the
new password again to confirm.
Change Password
New Password
Confirm Password
Back Exit
EXIT RETURN
Panel Lock
You can lock the control buttons on your TV by using this
Panel Lock . When this function enables, the TV can be
controlled only by the remote control.
1. Highlight the
Parental in the SETUP menu, and
press ► or to select.
2. Enter the 4-digit password.
3. Use ▲ or ▼ to highlight the Panel Lock and press
◄ or ► to switch the function On or Off .
Note: When the Panel Lock is set to “On”, TV can be
turned off by pressing the power keys on the TV or the
remote control, but can be turned on only by the remote
control.
Factory Default
Selecting Factory Default will reset all TV settings,
including stored channels, to their original factory values.
1. Highlight the
Parental in the SETUP menu, and
press ► or to select.
2. Enter the 4-digit password.
3. Use ▲ or ▼ to highlight the
Factory Default and
press ► or to select.
Note: After factory default is completed, the initial setup
screen will appear.
Programme Guide
The programme guide gives access to programme
details for all available channels.
Guide
1. Select the on-screen guide by pressing
GUIDE
, the
guide screen will appear highlighting details of the
programme and event currently being viewed. This
may take a few moments to appear.
2. Press ◄ or ► for information on other events
scheduled for the programme selected.
3. For details of other programmes currently available,
press ▲ and ▼ to scroll up and down the
programme list.
EPG Timer
EPG (Electronic Programme Guide) supports 8 sets
of timers. You can set or cancel a timer for a selected
programme within the guide. When the TV is on and the
timer activates, a dialogue box is shown informing you
that the programme is about to start. When the TV is in
standby mode and the timer activates, the TV will wake
up with backlight off, speaker mute on, and change to the
channel selected.
You must set the time correctly before using this function.
All set timers are cleared when performing a new
channel scan.
1. Press
OK button to set/unset Timer in the selected
programme.