Toshiba 2010 User Manual Download Page 54

Page: 54 / 212

Getting Started

Using the computer for the first time

5.375 x 8.375 ver 2.3.2

Sample Add Printer Wizard

Follow the instructions on the screen to add your printer.

If your printer is not found, or to install the driver manually,
use the printer driver that came with the printer to complete
the setup process.

Enter a name for your printer, or use the name supplied in the
Printer name text box.

To set the printer as the default printer for Windows

-based

programs, click

Yes

, then click

Next

To print a test page, click

Yes (recommended)

, then click

Finish

TECHNICAL NOTE: Some printers require a specific installation
process. In this case, the Windows

2000 Add Printer Wizard will

display an error message. If this happens, refer to your printer
installation guide for further instructions.

Summary of Contents for 2010





















































































































































































































Search results

Summary of Contents for 2010

Reviews:

Related manuals for 2010

Brands by name

Popular brands

Toshiba 2010, User Manual

Search results

Summary of Contents for 2010

Reviews:

Related manuals for 2010

Brands by name

Popular brands