Toshiba 2000 User Manual Download Page 107

Page: 107 / 214

7-9

HW S

ETUP

AND

ASSWORDS

Supervisor password

Enabled

Enables the USB KB/Mouse Legacy Emulation. (Default)

Disabled

Disables the USB KB/Mouse Legacy Emulation.

USB-FDD Legacy Emulation

Use this option to enable or disable USB-FDD Legacy Emulation.

Enabled

Enables the USB-FDD Legacy Emulation. (Default)

Disabled

Disables the USB-FDD Legacy Emulation.

LAN

Wake-up on LAN

This features lets the computer’s power be turned on when it receives a wake-up
signal from the LAN.

Enabled

Enables Wake-up on LAN.

Disabled

Disables Wake-up on LAN. (Default)

CAUTION: Do not install or remove an optional memory module while
Wake-up on LAN is enabled.

NOTE: Wake-up on LAN does not work without the AC adaptor. Leave it
connected, if you are using this feature.

Built-in LAN

Enabled

Enables built-in LAN functions. (Default)

Disabled

Disables built-in LAN functions.

Supervisor password

Refer to the readme file of the Supervisor Password Utility for instructions on
setting the Supervisor Password.

The path to the readme file is

C:\Program Files\TOSHIBA\Windows

Utilities\SVPWTool

. In the

SVPWTool

directory, open the

readme.htm

file.

Summary of Contents for 2000























































































































































































































Search results

Summary of Contents for 2000

Reviews:

Related manuals for 2000

Brands by name

Popular brands

Toshiba 2000, User Manual

Search results

Summary of Contents for 2000

Reviews:

Related manuals for 2000

Brands by name

Popular brands