
English
- 13 -
Analogue general controls, time display, stereo/
bilingual transmissions, child lock
Selecting programme positions
To select a programme position use the numbered buttons
on the remote control.Programme positions can also be
selected using
and
buttons on the remote control
and the top of the TV. Press
to display the on-screen
information i.e. programme position, stereo/mono signal
and picture format.To revert to the previous programme
position press
.
The Time Display
The time display facility allows the current (text service) time
to be seen on the television screen.
Press
whilst watching a normal television broad-
cast to see a time display from the broadcaster.
Stereo and Bilingual transmissions
If stereo or dual language broadcasts are transmitted the
word Stereo or Dual will appear on the screen each time
programme positions are changed, disappearing after a few
seconds. If the broadcast is not in stereo the word Mono
will appear.
Stereo...
Press
to select
Stereo
or
Mono.Bilingual...
Bilingual transmissions are rare. If they
are transmitted the word
Dual
will display. Choose the re-
quired programme number and if the word
Dual
appears
press
to select
Dual 1
or
Dual 2.
In digital mode, a list of languages and audio formats may
be shown briefly (mono, stereo, multi-channel). Use the
button to select between them.
Child lock
CHILD LOCK
disables the buttons on the top of the televi-
sion. All buttons on the remote control can still be used.
SETUP MENU
TV Setup
OK
Local Options
OK
Auto tuning
OK
Manual tuning
OK
Programmes
OK
Back
Watch TV
Analogue TV
menus will appear on the screen. Press
Up or Down button select the
FEATURES
menu. Press
the Down button to choose
Child Lock
and press the
Left or Right button to turn it on or off.
FEATURES
Sleep Timer Off
Language English
Back:Menu Exit: TV
Child Lock Off
Menu Colour Opaque
Favorite Mode Off
When
Child Lock
is selected, a reminder will appear
when any of the
top
buttons are pressed. Once the
television has been switched off it can ONLY be brought
out of standby using the remote control.