30
EPG Timer
You can choose whether or not the screen switches on when the timer event begins - please see
page 18 (Rec screen status (LCD Power on/off)). This is so that if you are using the timer to make
a recording to your VCR or other device, the TV screen will not switch on unless you want it to.
If you try to switch to another channel while a timer event is in progress, the following message
will appear: ‘WARNING: CHANGING THE CHANNEL WILL INTERRUPT YOUR EVENT TIMER. ARE
YOU SURE YOU WANT TO PROCEED? YES/NO’. Select Yes or No according to your wishes.
Note:
When the EPG Timer starts, the
message “Event Timer Started” will
appear.
A maximum of eight Timers can be
programmed.
If the EPG Timer starts when it is
already switched on, it will start at the
exact time that is set. If it starts from
the standby mode, it will begin 20
seconds in advance of the stated time.
You cannot hasten the start time from
the original start time of the Event.
You cannot set with the same date
and time of another Event.
Press the
Yellow
button to change
the start time of the event.
Press the
Blue
button to change the
time duration of the event.
If the EPG Timer begins during
standby mode, the
(Power)
indicator on the unit will be lit in
orange. This is to indicate that an
EPG Timer event has begun in
standby mode.
When in power-off-condition, EPG
Timer cannot be activated.
•
•
•
•
•
•
•
•
•
1
Press
GUIDE
to display the Guide menu. Then press
▲
/
▼
/
◀
/
▶
to highlight the programme you want to set as a
timer event, then press
ENTER
.
Page -
Page +
Prev.Day
Next Day
MNO
PQS
STU
TCM
VWXYZ
SAT.1
ARTE
DEF
671_MNO_10Step_0820_0100_0120_Audio2_0100_0120...
8
0
0
2
/
8
0
/
0
2
n
u
S
671 MNO
01:00
Channels
679_VWXYZ_Monosoo_0100_0300...
No Event Name
No Event Name
No Event Name
No Event Name
671_M...
672_PQR_SMPTE_col...
673_STU_SDTV... 673_STU_SDTV Moving...
672_PQR_SMPTE_col...
671_M...
671_MNO_10step
02:00
01:30
Navigate
Enter
Exit
Guide
View
Info
TV/Radio
Guide
16:50 Sun 20/08/2008
TV
Note:
If you select an event which has already started, the selected
program will be displayed on the screen, as you cannot set
the timer for a programme which has already started.
To display the stored timer events, press
GUIDE
twice.
The Event Timer menu (see step 3 below) will appear. You
can also delete or change the frequency (Once / Daily /
Weekly) of the stored timer events (but please note that
you cannot edit the time details that have been set from
the EPG).
•
•
2
The confirmation banner will be displayed.
Press
◀
or
▶
to select ‘Yes’ or ‘No’, then press
ENTER
(the
selected option is shown in blue).
3
The Event Timer menu will appear.
Press the
Red
button to set the Timer mode for a selected
event.
Event Timer
Navigate
Enter
Exit
Service Name Mode
Date
Time Duration
BBC ONE Once
26/02/08 08:10 00:23
Timer mode
Delete Timer
Edit Timer
Edit Duration
4
The Timer mode
specifies the
frequency of Timer
wake-up which can
be set as Once,
Daily or Weekly.
Press
ENTER
to
save the selected
Timer mode.
Event Timer
Service Name Mode
Date
BBC ONE Once
26/02/
Once
Daily
Weekly
Note:
To delete a timer event, select the specified event, then
press the
Green
button.
5
To return to the Guide menu, press
DIGITAL MENU
.
To clear the menu screen, press
EXIT
.
52R0131A_ENG.indd 30
52R0131A_ENG.indd 30
4/3/09 11:08:38 AM
4/3/09 11:08:38 AM
