14
Basic Operation
Note:
If the built-in tuner does not receive
anything (e.g. if no antenna is
connected) during TV-operation, then
the TV-unit will change to standby
after approx. 15 minutes.
•
Channel selection
With the
numbered buttons
.
Example:
No. 2: Press
0
and within 2 seconds, press
2
.
No. 29: Press
2
and within 2 seconds, press
9
.
Press
CH
or to change up or down a channel. This takes
approx. 2 seconds. If the auto search only stored 5 stations,
only these 5 will appear. Skipped channels will not appear (see
page12).
The CH LIST shows a list of all receivable programmes.
They are located in channels 1 to 99.
Press
CH LIST
to display the CH LIST.
Press
▲
or
▼
to select the desired channel.
Press
CH LIST
to display the selected channel. Press
EXIT
to
exit.
•
•
QuickView
CH RTN
button allows you to go back to the last selected
channel.
Volume adjusting
Press
VOL
+
or
–
to adjust the volume. The volume level
indicator disappears after 4 seconds.
MUTE
Press
MUTE
. The sound will be cut off. MUTE will appear for
approx. 4 seconds.
The muting can be released by pressing
MUTE
again or
VOL +
or
–.
Information display
In the analogue TV mode:
Press . Channel number
and picture size setting
will appear for approx. 4
seconds.
In the digital TV mode:
Press . The program
information will appear (see
‘Channel banner’ on page 27).
SLEEP TIMER
To set the sleep timer press
SLEEP
. SLEEP and the minutes will
appear. Each time you press
SLEEP
,
the SLEEP time shown
will change in the order of 120, 110, 100, 90, 80, 70, 60, 50,
40, 30, 20, 10, 0. When the displayed time runs out, the unit
will switch to standby. The display will disappear after approx. 4
seconds.
To cancel the sleep timer:
Press
SLEEP
repeatedly until ‘0’ appears.
S T E R E O 1
A R D
A U T O
52R0131A_ENG.indd 14
52R0131A_ENG.indd 14
4/3/09 11:08:25 AM
4/3/09 11:08:25 AM
