English
- 26 -
Autoposition
If you shift the picture horizontally or vertically to an unwanted
position, use this item to put the picture into correct place
automatically.
Select the
•
PC POSITION
option from the main menu.
PC
Position
menu appears on the screen:
Press the
•
Down
button to highlight
Autoposition
and then
press the
OK
button.
H Position
H (Horizontal) Position shifts the image horizontally to right
hand side or left hand side of the screen.
In the
•
PC POSITION
menu press the
Down
button until
H
Position
is highlighted.
Press the
•
Left
or
Right
button to adjust the value.
V Position
V (Vertical) Position shifts the image vertically towards the
top or bottom of the screen.
In the
PC POSITION
menu press the
Down
button until
V
Position
is highlighted.
Press the
Left
or
Right
button to adjust the value.
Dot Clock
Dot Clock adjustment corrects interference that appear
as vertical banding in dot intensive presentations like
spreadsheets or paragraphs or text in smaller fonts.
In the
•
PC POSITION
menu press the
Down
button until
Dot Clock
is highlighted.
Press the
•
Left
or
Right
button to adjust the value.
Phase
Depending on the resolution and scan frequency that you
input to the TV Set, you may see a hazy or noisy picture on
the screen. In such a case you can use this item to get a clear
picture by trial and error method.
In the
•
PC POSITION
menu press the
Down
button until
Phase
is highlighted.
Press the
•
Left
or
Right
button to adjust the value.
Dot Clock
Dot Clock adjustments correct the interference that appear
as vertical banding in dot intensive presentations like
spreadsheets or paragraphs or text in smaller fonts.
In the
•
PC POSITION
menu press the
Down
button until
Dot Clock
is highlighted.
Press the
Left
or
Right
button to adjust the value.
PC Picture controls
Contrast, Brightness and Colour Temperature adjustments
in this menu are identical to adjustments de
fi
ned in TV
picture menu.
When Colour Temp is Manual, you can also adjust the R, G,
B items. R, G and B adjust the TV image colour in PC RGB
mode. You can change the TV colour to your desired colour:
R (Red), G (Green), B (Blue)
Select Reset and press
OK
button to reset the adjustments
to factory default settings.
Note:
For switching to
PC
source, press
SOURCE
button on your
remote control and select PC input. You can also use
Source
menu to switch to
PC
mode.
Note that PC mode menu settings are available only while
the TV is in PC source.
PC Mode
PC Picture Position and PC Picture menus are described below. The other menu items are identical to TV mode menus.
Please see the previous sections.
00_MB45_[GB]_(01-TV)_1900UK_IDTV_NICKEL9_22740W_DVD_(IB_INTERNET)_10070651.indd 26
00_MB45_[GB]_(01-TV)_1900UK_IDTV_NICKEL9_22740W_DVD_(IB_INTERNET)_10070651.indd 26
30.11.2010 02:16:46
30.11.2010 02:16:46
