English
- 18 -
Audio Description (optional)
Audio description refers to an additional narration track for
blind and visually impaired viewers of visual media, including
television and movies. The description narrator talks through
the presentation, describing what is happening on the screen
during the natural pauses in the audio (and sometimes during
dialogue, if deemed necessary). You can use this feature, only
if the broadcaster supports that additional narration track.
In the con
fi
guration menu, highlight
•
Audio Description
by
pressing
Up
or
Down
buttons and press
OK
.
Use
•
Up
or
Down
buttons to select an item. Then use
Left
or
Right
buttons to set.
Audio Description
: This function enables or disables the
audio description feature.
Preferred Language
: You can de
fi
ne a preferred language
by using this setting. This setting can be used only when it
is available.
Relative Volume
: Using this option, the Audio Description
volume level can be increased or decreased relatively,
according to the general volume.
Standby Search (*)
(*) This setting is visible only when the Country option is set
to Denmark, Sweden, Norway or Finland.
If the Standby Search is set to On, when the TV is in
standby mode, the TV will look for any changes in the saved
channels.
Use
•
Up
or
Down
button to select
Standby Search
and then
press
Left
or
Right
button to set this setting as On or Off.
If you change Standby Search to Off, this function will be
•
unavailable. To use Standby search please make sure that
you select Standby Search as On.
Viewing Main Menu
Press “
•
”/ “
” buttons on the TV at the same
time to view main menu.
Press
•
MENU
button on the remote control to view main
menu.
Selecting Programme Positions
To select a programme position use the numbered buttons
on the remote control. Programme positions can also be
selected using
P+
and
P-
.
Press
INFO
to display the on-screen information i.e.
programme position, stereo/mono signal and picture format.
To revert to the previous programme position press
(
SWAP)
.
Input Selection
Use the Input Selection window if the television does not
switch over to a connected source automatically.
• Press
SOURCE
button on your remote control for directly
changing sources. Or select
Source
option from the main
menu by using
Left
or
Right
button. Use then
Up
or
Down
button to highlight an input and press
Right
button
to select.
Note
: You can mark desired source options by pressing the
OK
button. Therefore, when
SOURCE
button is pressed,
only the marked source options will be available (except for
the TV source).
Digital Settings
Con
fi
guration
continued
General Controls
Some of the main controls of your TV are as the following.
00_MB45_[GB]_(01-TV)_1900UK_IDTV_NICKEL9_22740W_DVD_(IB_INTERNET)_10070651.indd 18
00_MB45_[GB]_(01-TV)_1900UK_IDTV_NICKEL9_22740W_DVD_(IB_INTERNET)_10070651.indd 18
30.11.2010 02:16:42
30.11.2010 02:16:42
