English
- 19 -
English
Initial Installation
Before switching on the TV, put your decoder and media recorder to
Standby
if they are connected and
ensure the aerial is connected to your TV. To set up the TV, use the buttons on the remote control as
detailed on
page 13
.
IMPORTANT: Ensure that the aerial is connected and
a Common Interface module is not inserted before
switching on the TV for the
fi
rst time installation.
Connect the mains plug and switch the TV to on
1.
using the side control switch. If the TV does not
switch on, press any numbered or button on
the remote control, then the language selection
menu will be displayed. This screen will appear
the
fi
rst time that the TV is switched on and each
time the TV is reset.
By pressing
2. Up
or
Down
button, highlight the
language you want to set and press
OK
button.
The following message will be displayed next:
By pressing
3. Left
or
Right
button, select the
country
you want to set and press
Down
button
to highlight the
Search Type
option. Use
Left
or
Right
to set the desired search type. Available
search types are Digital and analog, digital only
and analog only.
When set,
4. Down
buton to select Teletext
Language. Use
Left
or
Right
button to select
desired Teletext Language.
Press
5. Down
button after setting Teletext Language
option.
Scan Encrypted
Channels
will be then
highlighted. You can set
Scan Encrypted
Channels
as
Yes
if you want to scan coded
stations.
Press
6. OK
button on the remote control to continue
and the following message will be displayed on
the screen:
Select
7. Yes
button by using
Left
or
Right
button
and press
OK
button to continue.
The Auto tuning screen will appear and the
8.
television will start to search for available stations.
The progress bar will move along the line. You
must allow the television to complete the search.
The following OSD will be displayed on the screen
and the television will search for the selected
broadcasts:
Note
:
You can press
MENU
button to cancel.
After the available stations are stored, Channel List
•
will be displayed on the screen. If you like the sort
channels, according to the LCN, please select
Yes
and then press
OK
button
(if available).
Press
•
OK
button to quit channel list and watch TV.
Note
:
Do not turn off the TV while initializing
fi
rst time
installation.
19DL502B_MB62_[GB]_(01-TV)_(IB_INTERNET)_DVB-T_(1910UK)_10075891.indd 19
19DL502B_MB62_[GB]_(01-TV)_(IB_INTERNET)_DVB-T_(1910UK)_10075891.indd 19
21.01.2012 17:51:24
21.01.2012 17:51:24
