English
36
CONTROLS AND FEATURES
Input signal selection
This specifies the type of signal going into SCART
on the back of the television. Please refer to the
manufacturers instructions for the connected
equipment.
In the
SETUP
menu, press ▼ to highlight
SCART
, then press ► or to enter.
OSD Language
SCART
Automatic Power Down
Location
Software Upgrade
SETUP
Reset TV
Home
On
English
Select
Back
Exit
EXIT
Enter
OK
RETURN
Parental
Model 19/22:
Press ◄ or ► to select
Auto
,
Mixed
,
RGB
,
Composite
, or
S-Video
.
SCART
Select
Back
Exit
EXIT
RETURN
SCART
Auto
Model 26/32/40:
• Press ▲ or ▼ to select
SCART 1
and
press ◄ or ► to select
Auto, Mixed, RGB,
Composite,
or
S-Video.
• Press ▲ or ▼ to select
SCRAT 2
and
press ◄ or ► to select
Auto, Composite,
or
S-Video
.
SCART
Select
Back
Exit
EXIT
RETURN
SCART 1
SCART 2
Auto
Auto
Check the signal output of the DVD or compatible
device, please select the correct setting for
“SCART input”.
REGZA-LINK Controls
This feature uses
CEC
(Consumer Electronics
Control) technology, and allows the control of
Toshiba
REGZA-LINK
compatible equipment
from the television’s remote control.
NOTE:
Not all Toshiba products currently support
REGZA-LINK.
Equipment Control
The
REGZA-LINK
mode on the television’s
remote control allows the control of connected
REGZA-LINK
equipment being watched.
To control the
REGZA-LINK
input source, first
select the equipment with
REGZA-LINK
input
source selection, then switch the mode on the
remote control to
REGZA-LINK
and press any
buttons.
The available functions are dependent on the
equipment connected. Not all the remote control
keys may be available. Please refer to the
operation manual for each piece of equipment
connected.
NOTE:
The television features that can be
controlled by the connected equipment are:
Standby, Volume, Channel, Sound Mute, Display
Information, Number Buttons and Previous
Programme.
