Toshiba 19AV550E, Owner'S Manual

Page: 27 / 36

27
Connecting your TV
• This TV is only operable with L-PCM on
32/44.1/48 kHz and 16/20/24 bits. If there is no
sound when using HDMI, use the analog audio
cables to connect the TV and the HDMI device,
and select
Analog in HDMI audio of the AV
connection menu (
-
page 28).
• This TV is able to connect with HDMI devices.
But it is possible that some HDMI devices may
not operate properly with this TV.
Connecting an HDMI or a DVI device
The HDMI input on your TV receives digital audio
and uncompressed digital video from an HDMI
device or uncompressed digital video from a DVI
device. This input is designed to accept HDCP
program material in digital from CEA-861-D
compliant consumer electronic devices (such as
a set top box or DVD player with HDMI or DVI
output).
The HDMI input is designed for best performance
with 1080i (50 Hz/60 Hz) and 1080p (50 Hz/60
Hz) high-defi nition video signals, but will also
accept and display 480i, 480p, 576i, 576p, 720p
(50 Hz/60 Hz) and VGA signals.
• HDMI: High-Defi nition Multimedia Interface
• DVI: Digital Video Interface
• HDCP: High-bandwidth Digital Content
Protection
• CEA-861-D compliance covers the
transmission of uncompressed digital video
with high-bandwidth digital content protection,
which is being standardized for reception of
high-defi nition video signals. Because this is
an evolving technology, it is possible that some
devices may not operate properly with the TV.
• E-EDID: Enhanced-Extended Display
Identifi cation
• Acceptable PC signal format:
VGA: VESA 640
5
480 @ 60 Hz
S-VGA: VESA 800
5
600 @ 60 Hz
XGA: VESA 1024
5
768 @ 60 Hz
W-XGA: VESA 1280
5
768 @ 60 Hz
W-XGA: VESA 1360
5
768 @ 60 Hz
S-XGA: VESA 1280
5
1024 @ 60 Hz
• L-PCM: Linear-Pulse Code Modulation
Note:
HDMI, the HDMI logo, and High-Defi nition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing, LLC.
Connecting an HDMI device
One HDMI cable (type A connector)
VIDEO AUDIO
L R
IN
OUT
HDMI OUT
TV back view
HDMI device
For proper operation, it is recommended that you
use a short HDMI cable.
HDMI cable transfers both video and audio.
Connecting a DVI device
One HDMI (type A connector)-to-DVI adapter
cable and audio cables
VIDEO AUDIO
L R
IN
OUT
DVI
OUT
TV back view
DVI device
TV back view
HDMI (type A connector)-to-DVI adapter cable
For proper operation, the length of an HDMI-to-
DVI adapter cable should not exceed 3m. The
recommended length is 2m.
Standard analog audio cables
An HDMI-to-DVI adapter cable transfers only
video. Separate analog audio cables are
required.
1926AV550ETY_EN.indd 27 1926AV550ETY_EN.indd 27 10/20/2008 1:31:17 PM 10/20/2008 1:31:17 PM