
Congratulations on your purchase of a Toshiba DVD-RAM drive and Kit. The
following information will help you in the simple installation of your new DVD-
RAM drive.
CHECKING YOUR KIT PACKAGING
Please unpack your DVD-RAM kit, and assure that you have the following items:
!
Toshiba SD-W2002 DVD-RAM Drive
!
Blank Media - Single Sided/Type 1 DVD-RAM
!
CyberLink PowerDVD
™
Software
!
VOB InstantWrite Software CD
!
DVD-RAM Installation Instructions (this manual)
!
Quick Start Guide
!
Mounting screws
(4)
!
IDE BUS cable
!
DVD/CD sound cable
Additional items you may need that are not included in the kit are:
!
Phillips Screwdriver
!
Mounting hardware (i.e. some computer systems use mounting rails).
SYSTEM REQUIREMENTS
The DVD-RAM kit requires the following:
✔
At least 55MB of free hard disk space
✔
At least 32MB of RAM
✔
*Pentium II processor at 266MHz or higher or....
*Celeron 300A processor or higher or....
*K6-2 processor at 300MHz or higher
✔
Display card supporting DirectDraw
✔
16-bit or better sound card
✔
Microsoft
™
Windows 95 or higher
✔
Amplified stereo speakers
* These requirements are only required if you are using the CyberLink PowerDVD
™
software. The SD-W2002 DVD-RAM will work as a CD-ROM and DVD-RAM
when using a lower speed Pentium system.
1
Summary of Contents for 1202kit
Page 13: ...9 ...
Page 14: ...460020 C0 P N 460020 C0 ...