![Toshiba teli SPS02 Instruction Manual Download Page 26](http://html.mh-extra.com/html/toshiba-teli/sps02/sps02_instruction-manual_1138503026.webp)
D4213658C
24
Copyright © 2012 TOSHIBA TELI CORPORATION, All Rights reserved.
http://www.toshiba-teli.co.jp/index.htm
■
Entry date
Month:
Day:
Year:
In order to grasp the details of failure,
please fill out the following information, and send us the defective product with this report sheet enclosed.
(1) Customer information
Company Name
Department
Your Name
Telephone number
E-Mail address
FAX number
Postal code number
Address
(2) Return address
Please fill out this information, if the return addrrss is different from above address (1).
(3) Before submitting your request to repair, please refer the following solutions to fix common problems.
*In any case of the follow ing item s, pleasae perform in an environm ent that perm its the m axim al am out of safety.
*When turning on/off pow er, follow the procedure as provided by the device and m ake sure that it is safe and does not interfere w ith operation.
1) LED (Orange) light on the side of the product does not turn on.
□
Solid light
□
No light
□
Other
・
Make sure that power and I/O cable and a USB cable are connected to the product correctly and power is supplied.
*If both power and I/O cable and a USB cable are connected, power is supplied from an I/O cable for the power supply.
2) GPIO and RS-232 does not operate.
□
Correct
□
Incorrect
□
Other
・
Make sure that there is power and I/O cable breakage, and it is connected to your device correctly.
・
Please turn off this product once, switch on a power supply again after passing for a while, and cofirm operation.
・
If you wrote on application to the product, re-write again and check operation.
3) A image is not output.
□
Correct
□
Incorrect
□
Other
・
Make sure that a USB cable are connected to the product correctly and power is supplied.
・
Please turn off this product once, switch on a power supply again after passing for a while, and cofirm operation.
・
If you wrote on application to the product, re-write again and check operation.
(4) Failure situation
■
Accrual date
Month:
Day:
Year:
Model name
Serial No.
Your dealer
Purchase date
Month:
Year:
Condition of failure
(Please specify symptoms of trouble.)
(5) From when
□
Unknown
□
From the beginning
□
After a while
□
After environment was changed.
(
□
Others
:
)
(6) Occurrence frequency
□
Unknown
□
It certainly occurs.
□
It sometimes occurs.
□
It occurs, after time passes.
(
□
Others
:
)
Reception date :
Receipt No. :
JOB No:
Check :
<For dealer use>
Check
→
Check
→
As for the SPS application or the setting information that a customer saved, all data, the setting information and SPS application will be
deleted in order for us to install our own test application when confirming the phenomenon.
Also we doesn't do back-up of the data. Please understand and accept that we assumes no responsibility for the data in advance.
Smart Photo Sensor
Failure situation report sheet
Ver.1.06
Check
→
The offered personal information is not used for any purposes other than after-sale service, such as repair of a product and an inquiry, and the
questionnaire of the improvement in customer satisfaction.
Moreover, except for the case where it commissions"The offered personal information is not used for any purposes other than after-sale service,
such as repair of a product and an inquiry, and the questionnaire of the improvement in customer satisfaction.
Moreover, except for the case where it commissions within lim its required for the above-mentioned purpose achievement, it does not indicate to a
third party without a visitor's consent.
We pay careful attention and manage a visitor's information."