D4213658C
17
Copyright © 2012 TOSHIBA TELI CORPORATION, All Rights reserved.
http://www.toshiba-teli.co.jp/index.htm
8 Application Example
Checking if all the parts are ready.
Counting the number of the part.
Positioning of the circuit board.
Deciding the amount of liquid in the bottle.
Checking the label.
9 Specifications
Imager
Image Sensor
Type 1/2 CMOS sensor
Number of Effective Pixels
144 × 176
Cell Size
33.6 × 33.6[
µ
m]
Sensing Area
4.8 × 5.9[mm]
Exposure Time
1
µ
～
20ms
I/O Specification
Output
2 Line
NPN Open Collector
Power Supply Voltage
：
30V (maximum)
Residual Voltage
：
1V (maximum)
Load Current
：
100mA (maximum)
Input
2 Line
ON Voltage : 0.5V (maximum)
ON Current : 330
µ
A (short-circuit)
OFF Current : 50
µ
A (maximum)
USB
USB2.0 High speed
USB-Micro Type-B Receptacle
RS-232
TXD / RXD
Protection Circuit for GPIO
Output : Over Current Protection
Input : Over Voltage Protection
LED Signal Light
STA0 : Red STA1 : Green PWR : Orange
Power Supply
I/O cable for the power supply: DC12~24V±10%(ripple 10% or less)
USB cable : DC5V±5% (ripple 10% or less)
If both an I/O cable for the power supply and a USB cable are
connected, power is supplied from an I/O cable for the power
supply.
Power Consumption
2.4W
Ambient Conditions
Operation Temperature
0
～
40°C
Storage Temperature
-10
～
60°C
Operation / Storage Humidity
35
～
85%RH (no condensation)
