D4213658C
8
Copyright © 2012 TOSHIBA TELI CORPORATION, All Rights reserved.
http://www.toshiba-teli.co.jp/index.htm
Notes on using this product
•
Handle carefully
Do not drop the equipment or allow it to be subject to strong impact or vibration, as such action may
cause malfunctions. Further, do not damage the connection cable, since this may cause wire
breakage.
•
Environmental operating conditions
Do not use the product in locations where the ambient temperature or humidity exceeds the
specifications. Otherwise, internal components may be adversely affected. In particular, do not use the
product in areas exposed to direct sunlight. Moreover, during shooting under high temperatures, white
spots (noise) may be produced, depending on the subject or product conditions (such as increased
gain). However, such phenomena are not malfunctions.
•
This product can be used under various conditions, please be sure to test operation under the
condition and the environment you use.
•
Check a combination with the lens
Depending on the lens and lighting you use, an image is reflected as a ghost in the imaging area.
However, this is not because of a fault of the product. In addition, depending on the lens you use, the
performance of the product may not be brought out fully due to deterioration in resolution and
brightness in the peripheral area, aberration and others. Be sure to check a combination with the
product by using the lens and lightning you actually use. When installing a lens in the product, make
sure carefully that it is not tilted. In addition, use a mounting screw free from defects and dirt.
Otherwise, the lens etc. may be unable to be removed.
•
Do not expose the product's image-pickup-plane to sunlight or other intense light directly
Its inner CMOS (Complementary Metal-Oxide Semiconductor) sensor might be damaged.
•
Occurrence of noise on the screen
If an intense magnetic or electromagnetic field is generated near the product or connection cable,
noise may be generated on the screen. If this occurs, move the product or the cable.
•
Handling of the protective tape
If the product is not in use, affix the protective tape to the product to protect the CMOS sensor.
•
If the equipment is not to be used for a long duration
Turn off power to the product for safety.
