Torrey Pines Scientific, Inc.
7
TIMER
All units have a countdown timer reading in hours, minutes, and seconds. It can be set to
a maximum of 99:59:59. When the timer reaches 00:00:00 it will count up to show how
much time has elapsed since the timer timed-out
CALIBRATION
The units have been calibrated in the factory to NIST standard prior to shipment. In the
event that the user wants to calibrate to a different standard, the ability to recalibrate each
of the two calibration points is provided. Additionally, the ability to easily restore the factory
calibration values is included. See section “IX Temperature Calibration” and the attached
Programming Manual at the end of this document for more details.
NON-VOLATILE MEMORY
The units are equipped with EEPROM memory that will store user settings such as the last
set point, MENU options, user changed calibration points, and program steps. These
stored values will be recalled each time the unit powers up to maintain the configuration of
the previous session.
