Torrey Pines Scientific, Inc.
12
XI. CLEANING, MAINTENANCE, AND CONSUMABLE PARTS
CLEANING
These units are subject to splashes and spills during normal use. Be sure to wipe up all
spills with a soft cloth or paper towel as soon as they occur. If a cleaning solution is
necessary, use a mild soap or detergent solution and a soft cloth. Do not use solvents.
Caution: Do not attempt to clean the plate surface when hot. Burns might occur.
MAINTENANCE
There is no ongoing maintenance program needed with these units other than the normal
care and cleaning as instructed above, and a simple inspection done whenever the unit is
to be used. This simple inspection should include:
1. Checking that the Power cord and the serial cable to and from the heater module are not
frayed or burned.
2. Checking that the unit is not dirty to a point where proper performance is impaired.
This is especially important relative to the membrane switch and LCD window.
3. Being certain to store the unit properly, when not in use, in an area that will not have
items placed on top of the unit, and covering the unit in a way that will keep dirt and
other foreign bodies out of the unit.
SPARE PARTS AND CONSUMABLES
There are very few spare or consumable parts. A simple list is below. For more
information contact the factory.
Part Number
Description
730-0001
Power Cord, US
730-0006
Power Cord, German (European)
730-0008
Power Cord, UK
730-0004
Power Cord, Italian
730-0005
Power Cord, Australian
