ANCHORING INSTRUCTIONS
DIRECTIONS (Continued)
6. After the anchors have been partially installed, assemble any remaining X-Create
Components securely to the frame. (Components may be difficult to assemble if the
anchors are fully tightened.)
7. Tighten each anchor in every upright to the recommended torque specifications as listed
in the specifications for the hardware being used.
8. Install the front and rear rubber boots on each upright using four socket head bolts and
four washers.
6
After completing and before using, check that the all of the anchoring bolts and the frame
bolts are properly tightened. Test the system by having multiple people push it up and away
from themselves to ensure that the frame is securely fixed to the floor before training on.
For additional questions, contact Torque Fitness at:
email: [email protected]
Phone: 763-754-7533
