Thank you for your purchase of the Torque Fitness X-Create. The following information will help prepare your
facility and installation provider for the delivery and installation of the selected X-Create configuration.
SECURING Torque Fitness X-Create:
X-Create configurations must be anchored directly to structurally
sufficient concrete floors to ensure maximum safety and frame rigidity. Failure to secure the system to the
floor could result in toppling, leading to serious injury or death. Failure to secure it to the floor will also allow
it to “walk” or rock while in use. This type of movement is unsafe and could damage the floor surface.
APPROVED ANCHORING SPECIFICATIONS
Concrete Floor:
3 inch thick, 3,000 psi or greater
Minimum anchor embedment depth: 2-1/2 inches.
Anchor option 1:
3/8 to1/2 inch diameter x 3 inch Internally threaded drop-in
Anchor.
Grade
5
or
higher.
Anchor Option 2:
3/8 to1/2 inch diameter x 3 inch externally threaded concrete
anchor.
Note:
Read instructions included with the specific anchors used to
select the proper drill bit diameter and depth. This may vary by
brand
and
type.
APPROVED ANCHOR EXAMPLE
The following anchor can be found at all major hardware and home improvement stores and has been
tested for use with Torque X-Create Systems.
Approved Anchor and Specifications:
Tapcon® 11413
3/8
x
3
inch
Concrete
Anchor
Drill
Size:
ANSI
5/16
inch
Embedment
depth:
2-1/2”
Ultimate Pullout (in 3000 psi concrete): 5,445 lbs
2
