Torqeedo Power 48-5000, Translation Of The Original Operating Instructions

Page: 73 / 88

LED display
EN DE
Defects (red)
Defects cannot be remedied by the user. Torqeedo Service must be contacted in the
event of a defect.
Possible causes:
■
Battery deep-discharged
■
Irreversible self-protection triggered
■
Electronics self-check failed
Errors (red)
Errors lead to automatic power-off of the voltage outputs. These errors can be
remedied. After remedying the errors, you can again attempt to switch on the Power
48-5000. The Power 48-5000 does not automatically switch on.
If the Power 48-5000 has automatically powered off the voltage outputs, yet
it is still switched on (at the switch), the internal electronics (and thus also the
communication and LED) will switch off after one hour.
Possible cause of error Troubleshooting
Temperature too high
■
Let battery cool down
■
Provide for long-term cooling if
necessary
Temperature too low
■
Operate battery within the
specified temperatures
Short circuit or overcurrent detected
■
Check wiring
■
Check whether power
consumption by connected loads
is too high
The system Emergency kill switch/
Emergency Off switch has been
pushed
■
Set remote throttle to neutral
■
Deactivate Emergency kill switch
■
Switch battery on again
Warnings (yellow)
Warnings are notifications to the user. They will not cause the battery to
automatically switch off. An exception is SOC 0%.
page 73 / 88