48
49
Deutsch
English
Deutsch
English
Negative and positive terminals
Negative and positive terminals are available as clamping and screw connection.
They are directly interconnected, having the same function.
Ventilation
Ventilation automatically prevents any excess pressure within hermetically sealed
housing. It is equipped with a hydrophobic membrane.
4. Startup
• Voltages of up to 60 V may occur on contacts. Avoid contact with
hands.
• Secure Power 26-104 against slipping and tilting. Only mount battery
in a horizontal position, grips directed upwards.
• Absolutely avoid wearing metallic jewelry when working on or staying
beside batteries. Do not place metallic tools on batteries either as this
may induce court-circuits. Only use insulated tools.
• The Torqeedo Power 26-104 can only be stacked for storage, it must
not be stacked in operation.
Ventilation
• During handling and cleaning make sure you do not damage
ventilation.
• Do not cover ventilation.
• In case of damage, please contact Torqeedo service immediately.
4.1 How to switch on/off the Power 26-104
Turning on:
For operation with the Cruise outboard motor: To switch on the Power 26-104, shortly
press ON/OFF switch on remote throttle or tiller display.
Usage with other devices: Turning on with on/off-switch for Power 26-104.
Keep button pressed until its red LED lamp lights up for a few seconds – this is the signal
indicating that the battery is operative.
Switching on may take up to two seconds to prevent accidental switching on.
Switching off:
Power 26 -104 will switch off automatically within 48 hours after use (charging or
discharging). This will minimize the battery’s self-discharge and the risk of harmful deep
discharge.
Switching the battery off manually during operation with the Cruise Motor:
Switching the battery off manually with the ON-OFF switch:
Turning off with on/off-switch for Power 26-104: Keep button pressed for at least five
seconds. A brief flash of LED indicates that the battery is switched off.
OFF
Switch off the motor and
battery(ies): In order to also
switch off the battery, keep
the ON/OFF button on the
remote throttle or tiller display
pressed for 5 seconds until
„Off“ icon is displayed.
Switching off only the
motor: To switch off the
motor, press ON/OFF
switch until blackscreen
of the display: motor is
switched off, batteries
still run.
