Toro Z Master Z597, Service Manual

Page: 42 / 198

3-21 Z Master Z597 Diesel Service Manual
3
CHASSIS
2. Install the flange bearing over the left side of the
brake shaft, flange facing outward. Install mounting
bolts from the outside of the flange, through brake
retainer spacers, and through the frame.
Note: Before tightening the mounting hardware,
be sure that the brake lever arm is pointing
upward between the mounting hardware (Fig.
080).
Fig 080 DSC-1641
Fig 082 DSC-1644
4. Install clevis spring pin connecting brake rod to
brake shaft. Rotate clevis spring pin until it clips onto
brake rod clevis (Fig. 082).
Fig 081 DSC-1643
5. Install left and right rear tires. Torque wheel
mounting bolts to 95 ft-lbs (128.8 Nm).
3. Install clevis pin connecting the lower brake
assembly to brake shaft. Install cotter pin into clevis
pin (Fig. 081). Repeat procedure for right side.
A. Brake Lever Arm C. Bolt
B. Spacer
A
B
C