Toro Z Master Z597, Service Manual

Page: 195 / 198

7-48 Z Master 597 Diesel Series Service Manual
7
MOWER DECKS
7. If the measurement at positions B or C are not
correct, loosen the bolt attaching the rear chain
support arm (Fig. 559).
8. Loosen the jam nut under the rear support arm and
use the adjustment bolt to get a measurement of
3-1/8 to 3-1/4 inches (7.9 to 8.3cm).
Note: Ideally both sides of the mower are set to the
same distance.
9. Tighten the jam nut under the rear support arm and
tighten the bolt securing the chain to the rear support
arm.
Fig 559
fig. 67 m-6830
1. Rear chain 5. Adjustment bolt
2. Rear support arm 6. Front swivel
3. Bolt 7. Front support arm
4. Jam nut
Adjusting the Front-to-Rear Mower
Pitch
1. Position the right blade front-to-rear (Fig. 560).
Fig 560 fig. 68 m-1078
2. Measure the right blade at the A location (Fig. 560),
from a level surface to the cutting edge of the blade
tip (Fig. 561).
Fig 561
fig. 69 m-2539
MEASURE FROM CUTTING
EDGE TO A LEVEL SURFACE