decal126-2055
126-2055
1.
Wheel-lug nut torque 129 N∙m (95 ft-lb) (4x)
2.
Wheel-hub nut torque 319 N∙m (235 ft-lb)
3.
Read and understand the
Operator’s manual
before
performing any maintenance, check torque after first 100
hours then every 500 hours thereafter.
decal136-5508
136-5508
1.
Belt routing
decal114-4468
114–4468
1.
Warning—read the
Operator's Manual.
5.
Loss of traction/control hazard, slopes—loss of traction/control
on a slope, disengage the blade control switch (PTO),
proceed off the slope slowly.
2.
Warning—do not operate this machine unless you are trained.
6.
Crushing/dismemberment hazard of bystanders—do not carry
passengers, look forward and down when operating the
machine, look behind and down when reversing.
3.
Warning—engage the parking brake, stop the engine and
remove the ignition key; read the instructions before servicing
or performing maintenance.
7.
Cutting/dismemberment hazard; hand or foot—stay away
from moving parts and keep all guards and shields in place.
4.
Thrown object hazard—Stop the engine and pick up debris
before operating, keep bystanders a safe distance from the
machine, keep deflector in place
10
Summary of Contents for Z Master 74919TE
Page 76: ...Schematics g009180 Wire Diagram Rev A 76 ...
Page 77: ...Notes ...
Page 78: ...Notes ...
