Maintenance Service
Interval
Maintenance Procedure
Every 200 hours
• Torque the front and rear wheel nuts.
• Inspect opening on filter.
• Check the adjustment of the shift cables.
• Check the adjustment of the high–low cable.
• Check the adjustment of the differential-lock cable.
• Check the adjustment of the parking brake.
• Check the adjustment of the brake pedal.
• Check the condition and tension of the pump-drive belt.
• Check the adjustment of the clutch pedal.
• Check the adjustment of the accelerator.
• Inspect the service and parking brakes.
Every 400 hours
• Inspect or replace the spark plugs.
• Replace the fuel filter.
• Check the fuel lines and connections.
• Check the front-wheel alignment.
• Visually inspect the brakes for worn brake shoes.
Every 800 hours
• Change the hydraulic fluid and clean the strainer.
• Replace the hydraulic filter.
Every 1,000 hours
• Change the brake fluid.
• Drain/flush the fuel tank.
Yearly
• Complete all yearly maintenance procedures specified in the engine operator’s
manual.
Service-Interval Chart
Figure 26
Operating in Adverse Conditions
Important:
If the machine is subjected to any of the conditions listed below, perform maintenance twice as
frequently:
•
Desert operation
•
Cold-climate operation below 0°C (32°F)
•
Trailer towing
•
Frequent operation on dusty roads
33
Summary of Contents for Workman HD 07369
Page 55: ...Notes 55...