Toro Workman GTX Series, Installation Instructions Manual

Page: 3 / 8

2. Install the 3 shovel mounts to the side upright frame
brackets with 12 carriage bolts (5/16 x 3/4 inch) and
12 flange nuts (5/16 inch) as shown in
Figure 2 .
Figure 2
1. Carriage bolt (5/16 x 3/4
inch) 3. Flange nut (5/16 inch)
2. Side upright frame bracket 4. Shovel mount
3. Loosely install the 2 front upright frame brackets to the
inside of the cargo bed with 4 hex-head screws (1/4 x
3/4 inch) as shown in
Figure 3 .
Figure 3
1. Front upright frame
bracket 2. Hex-head screw (1/4 x 3/4
inch)
4. Install the pipe bracket to the 2 side upright frame
brackets and front upright frame bracket with 6 carriage
bolts (5/16 x 3/4 inch) and 6 flange nuts (5/16 inch) as
shown in
Figure 4 .
Figure 4
1. Pipe bracket 4. Carriage bolt (5/16 x 3/4
inch)
2. Flange nut (5/16 inch) 5. Front upright frame
bracket
3. Side upright frame bracket
5. Install the front support bracket (with 2 holes on each
side) to the top of the 2 front upright frame brackets
with 4 carriage bolts (5/16 x 3/4 inch) and 4 flange
nuts (5/16 inch) as shown in
Figure 5 .
Figure 5
1. Carriage bolt (5/16 x 3/4
inch) 3. Front support bracket (with
2 holes on each side)
2. Flange nut (5/16 inch) 4. Front upright frame
bracket
3