Toro Workman 07223-90001, Operator'S, Set-Up, And Parts Catalog

Page: 1 / 12

MODEL NO. 07224-90001 & UP
MODEL NO. 07223-90001 & UP
MODEL NO. 07269-90001 & UP
OPERATOR’S, SET-UP,
AND PARTS
CATALOG
INDUSTRIAL WORKMAN
®
KIT
FORM NO. 99-0744
©The TORO Company - 1999
All Rights Reserved
To assure maximum safety, optimum
performance, and to gain knowledge of the
product, it is essential that you or any other
operator of this Vehicle read and understand
the contents of this manual before the engine
is ever started. Pay particular attention to the
SAFETY INSTRUCTIONS highlighted by the
triangular safety alert symbol.
The safety alert symbol means CAUTION,
WARNING or DANGER - personal safety
instruction. Failure to comply with the
instruction may result in personal injury.
Keep this Operator’s Manual in the plastic tube behind the operator seat.
It is very important that all persons operating this equipment have easy access to these instructions at all
times!
Carefully read and follow the “Maintenance” Instructions that are provided with this equipment and the
Safety Instructions in the Workman
®
Vehicle Operator’s Manual.
SAFETY INSTRUCTIONS
RECOGNIZE SAFETY INFORMATION
This safety-alert symbol is used to call
attention to a dangerous situation, which
could result in serious injury or death to the operator
or a bystander.
Safety, mechanical and some general information
in this manual are emphasized. DANGER,
WARNING and CAUTION identify safety
messages. Whenever the triangular safety symbol
appears, it is followed by a safety message that
must be read and understood. For more details
concerning safety, read the Safety Instructions on
this page and page 2. IMPORTANT identifies
special mechanical information and NOTE identifies
general information worthy of special attention.
These instructions are provided as a guide for the
safe operation and maintenance of this equipment.
However, the operator’s personal safety, as well as
those persons in the work area, will depend on the
careful actions and good judgement of the operator.
To reduce the potential for injury or death,
comply with the following safety instructions.
BEFORE OPERATING:
1. Operate this machine only after reading and
understanding the contents of this manual and
the Workman
®
Vehicle Operator’s manual. A
replacement manual is available by sending
complete model and serial number to:
Hahn Equipment Co., 1625 N. Garvin St.,
Evansville, IN 47711.
2. Keep all shields, safety devices and decals in
place. If a shield, safety device or decal is
malfunctioning, illegible or damaged, repair or
replace it before operating the machine.
TOWING AT EXCESSIVE SPEEDS COULD
CAUSE VEHICLE TO LOSE STEERING
CONTROL.
Never tow vehicle faster than 5 MPH
(8 km/h).
Never exceed maximum tongue weight
of 400 LBS (181 KG.).
Never exceed maximum trailer weight
Without trailer brakes
1500 LBS (680 KG.)
With trailer brakes
3500 LBS (1587 KG.)
Read, understand, and follow Safety
Instructions below and in Workman
Operator’s Manual before operating
vehicle.
IMPROPER TOWING WITH THIS VEHICLE
MAY CAUSE SERIOUS PERSONAL INJURY
OR DEATH.
WARNING