Toro UTV500AAC00000, Operator'S Manual

Page: 39 / 64

37
I = Inspect and clean, adjust, lubricate, replace as necessary
T = Tighten R = Replace C = Clean
* = Dealer maintenance
**When using Toro 0W-40 All Weather synthetic oil, oil change interval can be increased to
every 1600 km (1,000) miles or every year.
Maintenance Schedule
Item Page
Initial
160 km
(100 miles)
Every
160 km
(100 miles)
Every
480 km
(300 miles)
Every
800 km
(500 miles)
Battery 43 I I
* Engine nuts and bolts — I I
* Valve clearance — I I
Spark plug 45 I I
45 Replace every 6500 km (4000 miles) or 18 months
Liquid cooling system 38 I Inspect every time before operating
Gas hoses 31 I Inspect every time before operating
31 Replace every 2 years
Engine/transmission oil and filter 39 R R**
Air filter 46 I I
Gear lubricant
(front differential - rear drive) 40 R I
40
Replace every 2 years or 3200 km
(2000 miles)
V-Belt 47 I I
Spark arrester/muffler 48 C
Tires/air pressure 47/17 I Inspect every time before operating
* Brake components 41 I Inspect every time before operating
Brake fluid 41 I *Replace every 2 years
Brake hoses 41 I *Replace every 4 years
* Steering — I Inspect every time before operating
* Suspension (Ball joint boots,
drive axle boots front and rear, tie
rods, differential and rear drive
bellows)
— I Inspect every time before operating
* Chassis nuts and bolts — I T
Wheel lug nuts 48 T T
Frame/welds/racks — I I
Electrical connections — I I
Headlight/taillight-brakelight 49 I Inspect every time before operating
Air filter drains — I Inspect every time before operating
Accelerator pedal 25 I Inspect every time before operating
ROPS 51 Inspect every time before operating
Occupant side restraints 51 Inspect every time before operating
Wheel nuts 48 I I