31
11. High Beam Indicator - Appears when
the headlights are on high beam.
12. Temperature Indicator - The speedom-
eter/tachometer needle will sweep full
scale and the LCD will go blank except
the high temperature icon will flash.
After 30 seconds, the speedometer/
tachometer needle and LCD will return
to normal, but the temperature icon will
continue to flash. The icon should not
be visible during normal operation.
13. Odometer/Trip Meter Indicator Dis-
play - Displays which function (ODO,
Trip, or Trip 2) is selected.
14. Wrench Indicator - Displayed in con-
junction with a DTC whenever an
EFI system error is detected.
15. Seat Belt Indicator - Displayed when-
ever the driver’s seat belt is not fas-
tened.
TC036A
Electric Fuel Pump
An electric fuel pump is mounted in the
gas tank to deliver gasoline to the fuel
injector. The fuel pump operates when
the ignition switch is turned to the ON or
START position.
Gas Hoses
Replace the gas hose every two years. Dam-
age from aging may not always be visible.
Oil Level Stick
There is an oil level stick for checking
the engine oil level. To check the oil
level, use the following procedure.
NOTE: The vehicle should be on
level ground when checking the
engine oil level.
1. Lift the cargo box.
2. From the left side, unscrew the oil
level stick and wipe it with a clean
cloth.
HDX234A
PR053B
3. Install the oil level stick.
NOTE: The oil level stick should be
threaded in for checking purposes.
4. Remove the oil level stick; the engine
oil level must be within the operating
range but not exceeding the upper mark.
GZ461A
5. On the 500, add oil to the oil level
stick opening until proper operating
level is achieved. On the 700 to add
oil, remove the seat, oil fill cap
access cover, and oil fill cap (using a
27 mm socket). After adding oil,
install the fill cap and tighten to 16
ft-lb; then install the cover and seat.
500
700
