Mounting the Wheel
Assemblies
1.
Mount a wheel assembly to each axle hub with
4 lug nuts (
). Tighten the nuts to 80 ft-lb
(108 N∙m).
2.
Adjust the tire pressure to 5 psi (34 kPa).
g014665
Figure 5
1.
Axle
2.
Wheel assembly
Important:
Higher tire pressure may
damage the machine.
Mounting/Adjusting the
Hitch Straps
The hitch straps are shipped mounted in the standard
position (
Important:
The trailer tongue must be parallel to
the ground when it is aligned with the tow vehicle
hitch.
g014666
Figure 6
Standard position
Using 1 of the configurations shown in
or
, adjust and secure the hitch straps to the
trailer tongue.
g014667
Figure 7
Low hitch position
4
